High heat harness tape, or high temperature harness tape, is a type of tape specifically designed to keep the harness fixed and insulated in high temperature environments. This tape has excellent heat resistance, wear resistance, chemical resistance and high viscosity, suitable for a variety of extreme working environments.
Specifications & Parameters
| Parameter | Specification |
|---|---|
| Material | High-temperature resistant fabric backing with adhesive layer |
| Thickness | 0.12 mm – 0.18 mm (customizable) |
| Width | 10 mm – 50 mm (standard sizes) |
| Temperature Resistance | -40°C to +150°C (continuous use) |
| Tensile Strength | ≥ 30 MPa |
| Elongation at Break | ≥ 20% |
| Adhesive Type | Heat-resistant acrylic or silicone adhesive |
| Color | Black (other colors available on request) |
| Flame Retardancy | UL94 V-0 or equivalent |
Product characteristics
1. High temperature tolerance: High heat harness tape is stable at extremely high temperatures, typically tolerating temperatures between 150°C and 260°C, or even higher, depending on the type and grade of material. This characteristic makes it ideal for use in high-temperature environments such as automotive engine compartments, industrial ovens, and aerospace equipment.
2. Insulation performance: This tape has good insulation performance, can effectively prevent current leakage and short circuit, protect the safety of wiring harness and circuit.
3. Wear resistance: Under high temperature and mechanical stress, the high heat harness tape can still maintain good wear resistance and extend the service life of the harness.
4. Chemical corrosion resistance: Good resistance to common acids, alkalis, oils and other chemicals to ensure the stability of the harness in a complex environment.
5. High viscosity: The use of high-performance adhesive to ensure that the tape can be firmly adhered to the wiring harness and other materials, not easy to fall off.
Application field
1. Automotive industry: Used for high temperature wiring harness fixing and insulation in automotive engine compartment, such as engine wiring harness, battery wiring harness, etc.
2. Industrial field: In the field of factory automation, mechanical equipment, power transmission, etc., used for wire harness fixing and insulation in high temperature environment.
3. Aerospace: In aerospace equipment, the application of high heat harness tape is particularly important due to the need to withstand extreme temperature changes and mechanical stresses.
4. Electronic and electrical appliances: In the need of high temperature insulation protection of electronic and electrical products, such as induction cookers, electric ovens and other internal wiring harness fixing and insulation.
Matters needing attention
1. Safe use: In the process of use, it is necessary to follow the relevant safety operating procedures to avoid direct contact between the tape and the fire source.
2. Storage conditions: Should be stored in a dry, cool, ventilated place, avoid direct sunlight and high temperature environment.
3. Regular inspection: Regularly check the use of the tape, such as aging, falling off or damage, should be replaced in time.
Usage Instructions
1.Surface Preparation: Clean and dry the surface to remove any dust, grease, or moisture.
2.Cutting: Cut the tape to the desired length suitable for the application.
3.Application: Wrap the tape tightly around the wire harness or component, ensuring slight tension for a secure fit.
4.Overlap: Overlap each turn by about 50% for consistent coverage and improved protection.
5.Finishing: Press down firmly to ensure full adhesion and a smooth finish.
6.Curing: Allow the adhesive to set; no additional curing required for most applications.
Chaoda Manufacturer Advantages
1.Advanced Production: Utilizes cutting-edge technology for high precision and consistent tape quality.
2.Strict Quality Control: Every batch undergoes rigorous testing to ensure compliance with international standards.
3.Customization: Offers tailored tape specifications including width, thickness, adhesive type, and color to meet specific client needs.
4.Strong R&D: Continuous innovation to improve heat resistance, adhesive strength, and durability.
5.Competitive Pricing: Efficient manufacturing processes enable cost-effective solutions without compromising quality.
6.Reliable Delivery: Well-established logistics network ensures timely and secure product delivery worldwide.
Manufacturer Services
1.Technical Support: Professional consultation on product selection and application techniques.
2.Sample Provision: Free or low-cost samples available for testing and evaluation.
3.Flexible Order Quantities: Supports both small-scale and large-volume orders.
4.After-Sales Service: Responsive customer service including troubleshooting, warranty support, and product replacement if necessary.
5.Global Shipping: Secure packaging and dependable international shipping options.
Hot Tags: high heat harness tape, China high heat harness tape manufacturers, factory
