Green Color Butyl Aluminium Foil Tape is an environmentally friendly solvent-free, non curing self-adhesive waterproof sealant produced through a special process using butyl rubber as the main material, combined with other additives and polymer materials. Other materials such as aluminum foil or non-woven fabric are pasted on the outer surface. It has adhesive strength on various material surfaces, as well as weather resistance, aging resistance, and waterproofing. It also has sealing, vibration reduction, and protection effects on the surface of the adhered material. Due to its complete absence of solvents, it does not shrink and does not emit toxic gases; Due to its non curing properties, it has the ability to follow the surface thermal expansion, contraction, and mechanical deformation of the adhered material, making it a new type of waterproof material.
Product features:
1) Can maintain flexibility and adhesion, can withstand a certain degree of displacement, and has good deformation tracking ability.
2) Waterproof sealing and chemical corrosion resistance, with strong resistance to ultraviolet radiation (sunlight); Long service life.
3) Easy to use, accurate dosage, reduced waste, and high cost performance.
4) Free from any solvents, safe and environmentally friendly.
Applications
1.Construction Industry: Widely used for sealing joints, seams, and edges in construction projects, especially in areas exposed to moisture and temperature variations.
2.HVAC Systems: Applied for sealing air ducts and joints in HVAC systems, improving energy efficiency and preventing air leaks.
3.Automotive and Aerospace: Used for sealing parts, reducing vibrations, and providing insulation in automotive and aerospace applications.
4.Roofing: Ideal for waterproofing and sealing roofing materials, including around vents, flashing, and joints, to prevent leaks.
5.Piping and Insulation: Used for sealing and insulating pipes, tanks, and other equipment exposed to extreme temperatures or moisture.
6.Soundproofing: The tape can be applied in soundproofing applications to reduce noise transmission through walls, ceilings, and floors.
7.Electrical Insulation: Used in electrical applications to insulate and protect wires and cables from environmental damage.
Usage Instructions
1.Surface Preparation: Clean the surface where the tape will be applied. Ensure it is dry, free from dust, grease, or any other contaminants to maximize adhesion.
2.Cut the Tape: Measure and cut the required length of tape. It is important to ensure that the tape covers the entire area that needs sealing.
3.Apply the Tape: Peel off the backing and apply the tape directly to the surface, pressing it down firmly to ensure good adhesion.
4.Smooth the Tape: Use a roller or smooth tool to press out air bubbles and ensure a strong, even bond across the surface.
5.Edge Sealing: For areas with seams or edges, make sure to press the tape firmly to avoid water or air leaks.
6.Allow to Set: Allow the tape to set and cure for the recommended time before exposing it to moisture or heavy usage.
Precautions
1.Surface Cleanliness: Ensure that the surface is clean, dry, and free of oil or moisture to achieve the best bond.
2.Application Temperature: The tape should be applied in temperatures between 10°C and 40°C (50°F to 104°F). Avoid applying it in extremely cold or hot conditions as this may affect its adhesive properties.
3.Storage: Store the tape in a cool, dry place, away from direct sunlight, to prevent degradation of the adhesive and ensure longevity.
4.Avoid Stretching: While the tape is flexible, avoid overstretching it during application to maintain its strength and integrity.
5.Regular Inspections: Periodically check the tape for signs of wear or lifting, especially in high-traffic or outdoor applications.
Hot Tags: green color butyl aluminium foil tape, China green color butyl aluminium foil tape manufacturers, factory
